Metallic Clay Leaf Collage - Project #80

Time: 2 Class Periods
Difficulty: Moderate
Cleanup: Soap & Water

Materials:

Self-Hardening Clay

Fettling Knife

Pottery Tools

Roylco Leaf Texture Rubbing Plates

Mayco Magic Metallic Paints & Patinas

Paint Atomizer

Cord or Wire

	View Project Video
Print Page

Use self hardening clay, texture rubbing plates and metallic paints to create your own leaf collage. This project also has an instructional video available!

Steps

• 
  Step 1
  Using 1 lb. of Stonex Clay per project, roll out a ¼" thick sheet. Press a rubbing plate into the clay (the back of the plate makes a raised design).
• 
  Step 2
  Cut out a leaf with the fettling knife. Repeat Steps 1 & 2 two more times.
• 
  Step 3
  With remaining clay roll out an abstract base piece. Attach leaves, making sure that students score seams propely before joining them together.
• 
  Step 4
  Clean up the sculpture, taking care to smooth edges. Add additional details with clay tools.
• 
  Step 5
  While clay is still moist, use a tool to cut two holes into the back of the base for hanging purposes. Allow sculpture to dry completely.
• 
  Step 6
  Paint sculpture with Magic Metallics set, applying a different color on each leaf and the base. While the paint is still wet, spray on included patinas to create realistic-looking metallic finishes. To complete the project, insert and knot cord into holes in the base (wire may also be used).

Products Used

• AMACO Stonex Self-Hardening Clay - 5 lb. (A-47338C)
• Kemper Hard Fettling Knife (KEM-F97)
• Kemper Pottery Tool Kit (KEM-PTK)
• Leaves Roylco Texture Rubbing Plates (ROY-5815)
• Mayco Magic Metallic Paints & Patinas - 6-Piece Set (CLR-MMKT18)
• Scheewe Paint Atomizer (MW-S8200)